This is the steering gear, the grease still looked fine, so I didn't touch it. It works smoothly.
I put the pulley on the transmission shaft, and put the dash support / steering support back on.
After restoring the brake pedals, I mounted them back on as well.
These are the brake connecting rods. The top one is original, and broken, the bottom one is new, and doesn't work right. I have to make new ones eventually.
The old seat looks pretty beat up.
Straightened out the lip.
Cleaned the rust off the top.
Cleaned the paint off the bottom.
Primer coat on, time for the steering column.
">
No comments:
Post a Comment