Late May, and the paint is flaking off.

After I returned from my trip, it was time to get back to work on my project. I had been working insane amounts of unpaid overtime, but I was able to take it in flex time.

Time to get rid of the rest of the paint.




This little spindle used to hold the clutch pedal. With an electric motor, I have no need for a clutch, so I took the pedal out. Turns out the pedal was also keeping the spindle in the transmission casing, and it goes right into the gear chamber, though it doesn't connect to anything. It was originally welded, but the weld had cracked. I welded it back up so I didn't have a 1 inch hole leaking gear oil all over the place.


Almost done now.


Looks a hell of a lot better.